CKW80 - Keyboard Kit

• Full CNC 6063 Aluminium top and bottom cases
• Built weight:
• Aluminium weight ~2kg
• Brass weight: ~2.6kg
• Typing angle：7°
• Front Height: 20mm
• Size: 360*140mm
• Mounting: Plateless/ Gasket/ Top Mount
• Hotswap PCB supports ANSI/ISO layout, both support WK/WKL
• Recommend to buy solder PCB for plateless
• Leave the F13 key solder place for knob
• Support VIA
• Upgrade to black core PCB which is better in quality than the ordinary PCB

• 1x Top and bottom case
• 1x Alu/Brass weight
• 1xType C connector and decoration
• 1x Middle frame 
• 1x Hotswap PCB
• 1x FR4 plate 
• 1x Daughter board
• 1x Silicone light bar 
• 1x Poron bottom foam 
• 1x IXPE switch pad 
• 1x Poron Plate foam 
• 1x Battery 
• 1x Battery foam 
• 1x Acrylic jackets kit for top mount 
• 1x Silicone gaskets kit for gasket mount 
• 1x Screw pack 
• 1x Leather bag

Gifts

• PVD keycap with CKW logo *1
• Tweezers with CKW logo *1
• Screwdriver with CKW logo *1
• H1.5 screwdriver set head *1
• H2.0 screwdriver set head *1

1. Appearance QC standards (including Stainless steel PVD weight and Alu anodized weight) are as follows: According to GB QC standards, our QC in light conditions is normal, and keep the distance between 20-25 cm to check the keyboard‘s appearance. If there is no defect, then the QC check is passed. If the keyboard has problems such as dirt/spot/trachoma, the QC check will pass if the dirt/spot/trachoma is less than 0.8-2.0 mm² (check with a film calliper). You can view the table of QC standards for dirt/spot/trachoma.
2. Plating marks caused by hanging holes inside during keyboard production are normal phenomena during production.
3. Due to PVD's special material properties, slight, unavoidable dust may be on the mirror surface during production. These are normal phenomena and within our quality approval range.